Meridian DSP420 User's Guide download pdf (Page 29)

Configuring the DSP420 loudspeakers using a computer

To connect the serial cable

The serial cable is symmetrical, and can be connected either

way round.

● Connect one end to the RS232 connector on the front panel

of the DSP420 loudspeaker.

● Connect the other end to one of the serial ports on the PC or

PC notebook computer.

Then specify the serial port you are using as follows:

● Choose Options... from the View menu to display the

Options dialogue box:

● Select the port you want to use and click the OK button.

To select which loudspeaker to

configure

You will only need to configure the DSP420 loudspeakers in your

system if one of them is the master speaker for the system, or if

you want to change the Position control. For more information

see Changing the setup options, page 25.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 42 43

No comments

Meridian DSP420 User's Guide Page 29