Bob Stuart answers Questions about the Meridian 596
Page 8
48 What video outputs are available on the SCART version?
596 comes in two versions. The SCART version provides a SCART connector as well as
separate connections for Composite and S.
You can select either S-Video or RGB. Composite is always available. In addition the SCART
socket can be configured to provide Composite, S, RGB or Blank. The Function select feature
of SCART provides display control and aspect ratio control signalling.
The Function select and blanking of the SCART connector can be configured by Source,
allowing a good degree of system control for main and 2-room installations. For example, the
SCART select pin can be tied only to the DVD source allowing picture control to revert for
other programs.
49 Does 596 have 5-wire RGB output?
No. Five-wire RGBHV is the format used by up-scaled progressive video and 596 does not
output progressive (see Q. 16). This may come with a later option.
50 Can I use 596 with a CD Recorder?
Not easily. The 596 does not provide the timecode flags in its digital outputs that many CD
Recorders need for track management. These time codes are omitted principally because
they reduce playback sound quality and as part of 596’s advanced copy-protection strategy.
596 as a Preamp…?
51 Can I use the 596 as a preamp?
596 does not have any inputs or a variable output, so it isn’t too useful as a preamp! However
it can be used as the system controller and can display volume and pass these commands on
to other Meridian products. This means it is a great partner for DSP33 Loudspeaker in a
simpler system.
52 596 and 2-room
596 has two audio and two video outputs, one pair can be used to feed a second room.
596 with 568 and/or DSP speakers...?
53 Can I use 596 direct into Meridian DSP Loudspeakers?
Yes – and what a system! For the ultimate purist 2-channel system, connect the 596 directly
to a pair of DSP Loudspeakers. The new or upgraded versions of DSP speakers support
96kHz and MHR. Enjoy CD and DVD music as never before!
54 Can I use 596 with the 568 Surround Processor?
Absolutely, these are natural partners. The digital output from 596 will provide access to the
maximum audio quality and features of your discs.
55 Can I use 596 with 568 or 861 and DSP speakers?
Yes, however in this system the processor must be the system controller. If you have an
installation currently controlled by the DSP speakers then this must be reconfigured in the
software setup. Note: if the processor is hidden from view, then you will need a 512 infrared
pickup.
(2 pages)
(9 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals