Meridian Faroudja DVP1080MF Installation Guide download pdf (Page 4)

HDMI or DVI or Analog YPrPb Input

Satellite Reciever

Computer

Analog RGBHV Input

DVD

DVI or

Analog YPrPb Input

Projector or Plasma

Analog RGBHV Output

Analog CRT

Computer Monitor

Analog RGBHV Output

Control System

Composite Input

VHS or Video Game

INSTALLATION BASICS

QUICKSTART INSTRUCTIONS

It is recommended that the entire manual be reviewed prior to installing video equipment. Here are the basic

steps to install the DVP1080. Due to the long list of available setup options for the different sources and

displays, it is important to review each component’s manual for proper operation.

NOTE#1: In installations where there are multiple sources using the same connection on the DVP1080, an

external switcher should be used.

NOTE #2: S-Video is an alternate input to use with satellite, DVD and video game sources.

1. Install equipment: Make sure there is proper ventilation to avoid overheating. Double check all

projector/screen calculations for best performance. Avoid using keystone correction, if possible.

2. Connect Sources: Make sure source devices are set to output the correct signal type that matches the

installation (Digital vs Analog, YPrPb vs S-video, etc).

3. Connect display: Make sure display device is set for the correct input signal type. Review the display’s

scan rate table (found in the rear of most manuals) to see what scan rates are supported (for example - most

displays will not accept 1024x768 via YPrPb but will via RGBHV or DVI). DVI cables must be rated for the scan

rate/length being used; up to 50’ non-fiber cable okay if rated to 1280x1024. For 1920x1080p, fiber must be

used for cables runs over 15’.

4. DVP1080: press the MENU button for 7 seconds to enter the SETUP menu. Set the output scan rate.

5. DVP1080: set the proper screen shape.

6. DVP1080: Set the correct output type - Digital/Analog (RGB or YPrPb)

7. Display Device: Adjust Brightness and Contrast. Use adjustments in the DVP1080 if they are not available

in the display.

RS232 Input/Echo

DVI Output

DVI

YPrPb

Not Used

1 2 3 4 5 6 7 8 9 ... 21 22

No comments

Meridian Faroudja DVP1080MF Installation Guide Page 4