Meridian G51 User Manual download pdf (Page 54)

Meridian Products – Outline Specifications

See data sheets and specifiers’ drawings for more detailed information

be associated with different loudspeaker layouts and profiles.

Outputs: The 861’s outputs can be provided as digital signals to feed

Meridian DSP Loudspeakers, or as variable analogue outputs using

a proprietary on-board 24-bit resolution D/A conversion method

– or as a mixture of both. Video control: broadcast-grade video

switching options for monitors, projectors and video tape routing.

The comprehensive setup and customisation facilities allow the user

to link any video and audio combination to the 12 sources (accessed

from Source switching on the front panel or the remote control).

Video formats supported via optional cards include Composite,

S-Video, Component (interlaced and de-interlaced/progressive),

HDMI and RGB.

Meridian Loudspeakers

DSP8000: System Design: Four-way active loudspeaker.

Crossovers at 80Hz, 200Hz and 2.6kHz. Four 24-bit D/A

converters. Five 100W power amplifiers per speaker. All processing

is performed upsampled in twin 100MHz digital signal processors

(DSPs). DSP8000 uses Meridian’s memory-based dejittering system

for ultimate clarity. Controls: System and speaker are operated with

the included Meridian System Remote. Control features include

source, bass and treble tilt, listening axis, volume, timecompensated

balance and absolute phase. Inputs: Two coaxial digital audio, 32kHz

to 192kHz at up to 24 bit. MHR support. Response: 20Hz to 20kHz.

Max. output 118dB spl. Display: Eight-character display behind front

glass, can be blank. Dimensions: 1350mm (53.2in) H, 400 (15.7) W,

528 (20.8) D. Finish: Black gloss piano lacquer or satin silver. Other

colours special order.

DSP7000: System Design Performance: Frequency response

in-room within 3dB from 30Hz to over 20kHz. Maximum output

>112dB spl @ 1m on music material. Noise less than 15dB spl.

Overall distortion typically <0.02% at any frequency or level. Inputs:

Two digital inputs to SPDIF standard;32kHz–96kHz sampling rates

at up to 24 bit; MHR support. Construction: Four-way acoustic

reflex system. Digital crossovers at 200Hz and 2.6kHz. 2 x 200mm

long-throw bass drivers.1 x 160mm polypropylene mid driver. 1

x 25mm aluminium-dome tweeter, silver wire, short horn-loaded

with protective grille. Black gloss piano-lacquer cabinet, other

colours to special order. FIFO memory buffer input for the lowest

possible jitter from almost any source. Analogue gain and filtering

using proprietary Meridian Class-A discrete amplification. Digital

and conversion electronics constructed using advanced surface-

mount techniques and partitioned 6-layer printed-circuit boards.

Four 24-bit 128 x oversampling D/A converters.Four 100W power

amplifiers per speaker. Controls: Rear-panel controls for Power

On/Off. MSR and RS232 port provide control over bass, treble

tilt, listening axis, volume, timecompensated balance and absolute

phase. Dimensions: 1050mm (41.3”) H, 348 (13.7”) W, 458 (18.0”)

D. Weight 70kg (154 lb) each.

DSP5500: System Design: Three-way active loudspeaker. DSP

crossover at 200Hz and 2.6kHz. Four channels of delta-sigma D/A

conversion. Four 75W power amplifiers per channel. All signal

processing is performed in the 100MHz digital signal processors.

Controls: System and speaker are operated with the included

Meridian System Remote. The listener has control over the source

and features including bass, tilt, listening axis, volume, balance and

absolute phase. Inputs: Two coax digital audio, 32kHz to 96kHz, up

to 24 bit. MHR support. Response: 35Hz to 20kHz. Max. output

112dB spl. Display: Four-character display. Drive units: Two 200mm

high-efficiency bass drivers, one 160mm polypropylene mid driver

and one Meridian 25mm short-horn tweeter with aluminium dome

and silver voice coil. Cabinet: Veneered MDF braced, steel shielded

and damped, in black ash or rosewood finish. Cables included.

5500 Dimensions: 1100mm (43.3in) H, 285 (11.2) W, 415 (16.3)

D. 5500HC Dimensions: 1100mm (43.3in) W, 285 (11.2) H, 415

(16.3) D.

DSP5200: Performance: Frequency response in-room within

3dB from 35Hz to over 20kHz. Linear-phase mid/top crossover.

Output >108dB spl @ 1m on music material. Noise less than 15dB

spl. Overall distortion typically <0.02% at any frequency or level.

Inputs: Two S/PDIF digital inputs, 32kHz-96kHz sampling rates at

up to 24 bit with MHR support. Construction: ‘2 1/2-way’ acoustic

reflex system. Single-port (vertical model) or dual-port (horizontal

centre). Drivers: 2 x 160mm polypropylene bass drivers. 1 x

25mm aluminium-dome tweeter, silver wire, short horn-loaded.

Electronics: Two precision 24/192 oversampling converters for

bass/mid and tweeter signals. Active bass/mid crossover. Digital and

conversion electronics constructed using advanced surface-mount

techniques and partitioned 6-layer printed-circuit boards. DSP:

150MIPS digital signal processor. Digital crossover at 2.6kHz.

Response correction for the whole system. Bass protection.

User tone controls. Analogue/digital volume and phase control.

Amplifiers: Three 75W power amplifiers, one for each driver.

Display: Eight-character display with system lights, can be blanked.

Dimensions: Vertical model: height: 903mm (without spikes/feet);

width: 300mm at base, tapering to 179mm; depth: 356mm at base,

tapering to 217mm. Horizontal centre model: height 200mm; width

734mm; depth: 265.75mm at deepest point. Weight: 35kg packed.

DSP420: System design: Inputs: 1 x digital input 75 Ohm,

IEC958, 44.1kHz – 96kHz FIFO locks at 44.1, 48, 88.2, & 96kHz

+150 PPM, PCM & MHR Cabinet: Aluminium front baffle with

sealed, mechanically damped and insulated acoustic enclosure.

Baffle finished in textured black enamel. White moulded frame

and Grille custom paintable Acoustics: 2 Way Infinite Baffle

enclosure 2 x 127mm high-efficiency long-throw custom drivers, 1

x Meridian 25mm tweeter with aluminium dome Response: 55Hz

- 20kHz +3dB Amplification: Internal 85W woofer, 65W tweeter.

6-200VA.DSP:100MHz Motorola 56364, Linear Phase Crossover,

96kHz/24Bit DAC. Dimensions: Frame 457mm (18”) square x 89

(3.5”) Hole cutout 420 square (16.54” x 16.54”) Product designed

to fit standard 16” stud centres Mounting: Positioning template

for New Construction, Easy install frame with fire proof power

connection box.

M420: Analogue Active version of DSP420 with balanced and

unbalanced line-level inputs.

DSP3100/M3100: Performance: Frequency response in-room

within 3dB from 45Hz to over 20kHz. Linear-phase mid/top

crossover. Output >105dB spl @ 1m on music material. Noise

less than 15dB spl. Overall electronic distortion typically <0.02%

at any frequency or level. Inputs: DSP3100: Two S/PDIF digital

inputs, 32kHz-96kHz sampling rates at up to 24 bit with MHR

support. M3100: Line level unbalanced (phono) and balanced

(XLR-3F) inputs, switch-selectable. Construction: Vertical

unit: 2-way ported design with 160mm bass driver; Horizontal

centre: 2½-way closed box design with twin 5¼ in (120mm) bass

drivers, with doped carbon fibre cones and cast alloy baskets. 1in

(25mm) Meridian piston treble drive unit with doped fabric dome.

Electronics: Constructed using advanced surface-mount techniques

and partitioned 4-layer printed-circuit boards. DSP3100 includes

two precision 24/192 oversampling converters for bass/mid and

tweeter signals; Motorola 56367 150MIPS digital signal processor;

Digital crossover at 2.3kHz; Response correction for the whole

system; Bass protection; User tone controls; Analogue/digital

volume and phase control. M3100 features precision line-level active

crossover. Amplifiers: Two 75W power amplifiers, one for each

band. Display: Eight-character display with system lights, can be

blanked. Dimensions: Vertical units: 7.65in/194mm x 15.2in/386mm

x 10in/254mm; Horizontal centre unit: 18.5in/470mm x

6.9in/173.5mm x 10in/254mm. Optional floor stand: 12.2in/310mm

x 20.2in/513.7mm from floor to top of platform x 12.65in/321.5mm.

(All dimensions w x h x d; original units are metric.) Weight:

Vertical unit: 30lb/13.5kg; Horizontal centre unit: 36lb/16.5kg.

Black or silver finish.

SW1600 & SW5500 Powered Subwoofers: Digital inputs: 1 x

S/PDIF coax input (+1 output) , 32-96kHz. PCM using IEC958, or

MHR connection support with auto-detection. Analogue inputs: 3

x phono inputs: mono, left, right. 3 x XLR balanced inputs: mono,

left, right. Frequency response within 3dB, 20Hz-400Hz in-room

(bypass). Noise and hum <-72dBm. Variable gain control. Variable

low pass filter 40Hz-150Hz. Internal filter defeat switch. Absolute

phase switch. Sealed enclosure. Black inert basket-braced bitumen-

damped cabinet constructed from 22mm MDF. 6mm annealed plate

glass top.

SW1600: Output stage: Power amplifier: 150W Class G high

efficiency ultra low output impedance. 1 x 300mm (12in) high-

efficiency long-throw custom driver. Acoustic output typically

>107dB spl @ 1m. 417mm x 417.5mm x 411mm (16.4in x 16.5in x

16.25in) (W x H x D excluding feet). Weight 28kg (62lb).

SW5500: Output stage: Power amplifier: 300W Class G high

efficiency ultra low output impedance. 2 x 300mm (12in) high-

efficiency long-throw custom drivers. Acoustic output typically

>110dB spl @ 1m. 775mm x 417.5mm x 411mm (30.5in x 16.5in x

16.25in) (W x H x D excluding feet). Weight: 50kg (110lb).

300 and 200 Series Installation Loudspeakers: Due to the

nature of these systems and the extensive range of options available, the

specifications are too wide-ranging to be included here. Please see the

data sheets and specifiers’ drawings for full details.

Meridian Faroudja Products

DVP1080MF: Digital Video Processor with 10-bit signal path;

1080i deinterlacing with MADI (Motion Adaptive DeInterlacing)

and 3:2/2:2 pulldown. High Bandwidth Mode: full resolution

1920x1080p (deinterlacing without scaling). Enhanced mode: 1080i

converted to 1280x720 resolution then scaled to the selected

output rate. Inputs: NTSC/PAL, Composite (BNC), S-Video (4-pin

DIN), Component (BNC) 480i/480p/720p/1080i, RGB (BNC)

480i/480p/720p/1080i, Comp. Sync - 1v pp, RGB - 700mv pp. DVI

Input: DVI - I (female) digital (0-255/16-235). Output (Progressive):

DVI - I (female) digital only 0-255, HDCP Compliant. Dimensions:

1.75in H x 17in W x 12.5in D (Depth inc rear BNC). Weight: 14 lbs.

Designed to accompany MF1 and MF2 projectors.

DVP1080HD: As DVP1080MF but adds PC (D15F) Pass-through

input and RGBHV (BNC & D15F), YPrPb (BNC & D15F) analogue

outs.

D-ILA1080MF1: Home Theatre Projector. D-ILA Device / 0.82in

(1920 pixels x 1080 pixels) x 3 (Approx. 6,220,000px). Normal

Throw version 1.9x power zoom/focus lens (2.0:1 to 3.8:1). Short

Throw version 1.4x lens (1.5:1 to 2.1:1).200 W Ultra-high pressure

mercury lamp. Screen 60in to 200in (Aspect ratio: 16:9). Throw

Approx. 2-15m. Input Signal:1080/60p or 1080/50p. Resolution:

1920 pixels x 1080 pixels. HS:56.25 kHz, 67.43 kHz, 67.5 kHz. VS:

50 Hz, 59.94 Hz, 60 Hz. Contrast Ratio: 2500:1 DVI input, HDCP-

compatible. Control: RS-232C I/O. Dimensions 20.2in x 7.6in x 22in

approx. (W x H x D) (513 mm x 193.7 mm x 558.5 mm approx)

(Excl. lens & protrusion). Weight: Approx. 37.5 lbs (17.0 kg).

D-ILA1080MF2: Home Theatre Projector. 3-chip D-ILA (0.82-

inch diagonal). Aspect Ratio: 16:9. Screen size/Throw: 40in to 200in

(16:9)/1.6m to 10.5m (16:9). Resolution: 1920 x 1080 pixels (16:9)

x 3 chips. Total resolution: Approx. 6,220,000 pixels. 1.3x zoom

lens (1.8:1 - 2.35:1, manual zoom/manual focus, 50% offset). Wide

conversion lens attachment option. 250 W Ultra-high pressure

mercury lamp. Contrast Ratio: 2100:1. HDCP compatible DVI-D

input. RS-232C seria control. Dimensions: (W x H x D) 11¾in x

5¼in 14-3/16in (298 x 134 x 360mm) without protrusions. Weight:

13.66 lbs (6.2kg).

MALB06-add. v1.1 • RE ƒ 20060616

1 2 ... 49 50 51 52 53 54 55

Comments to this Manuals

No comments

Meridian G51 User Manual Page 54

Comments to this Manuals

Related products and manuals for Receiver Meridian G51