Meridian G61 Installation Guide download pdf (Page 39)

Standard parameters

All DSP presets (except Mono and Direct) provide the following

standard parameters.

Individual DSP presets provide additional parameters, to allow you

to adjust specific features provided by that preset. For full details

refer to information about each preset later in this chapter.

Parameter Range Default What it changes

Treble* -10dB to +10dB +0dB The slope of the frequency response.

Bass* -5dB to +5dB +0dB The bass response.

Phase* + or - + The phase of all loudspeakers.

Axis† -2 to +3 -1 The vertical balance.

Balance <10 to 10> <0> The L-R balance.

HS Output?* Y or N Y Select Y for high-rate audio, upsampled if necessary. Select N for

standard-rate audio, downsampled if necessary.

Centre -3.0dB to +3.0dB +0.0dB The level of the centre.

Depth -2.5ms to +5.0ms +0.0ms The delay of the centre.

Rear -30dB to +10dB +0dB The level of the rears.

Sides -30dB to +10dB +0dB The level of the sides.

R Delay 0ms to 30ms Varies The delay of the rears.

S Delay 0ms to 30ms Varies The delay of the sides.

LipSync 0ms to 30ms 0ms The sync. delay.

*These parameters apply to all DSP presets.

†Axis is only available with Meridian DSP loudspeakers.

DSP presets

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 58 59

No comments

Meridian G61 Installation Guide Page 39