Meridian G68 Installation Guide download pdf (Page 39)

C o n f i g u r i n g t h e

d i g i t a l s u r r o u n d

c o n t r o l l e r

3 5

Settings

The following table summarises the product settings:

Option Values Description

Tuner region: Europe/elsewhere, Japan, USA Band selection (MW/LW or AM), tuning steps, and FM

deemphasis standard. For all countries except the USA or

Japan use the Europe setting.

The fan is: used as necessary, never used Specifies how the temperature controlled fan operates.

Distance measurement: feet/inches, metres Units for displaying and entering distances.

Do your subs play to 20Hz? No, THX Ultra2/yes Subwoofer frequency response.

Boundary Gain Compensation: off, on Reduces the bass to compensate for listening positions close

to a wall.

Rear speaker separation <12"/0.3m, 12-48"/0.3-1.2m,

>48"/1.2m

Separation between rear speakers; only available when there

are four surrounds.

Use AAC decoder to decode: all Zone 2 streams, AAC to main out Action of AAC decoder; only if a tape card is fitted.

Zone 2 digital output is: decoded, bitstream Zone 2 digital output format when previous option is set to

Zone 2.

Copy/Zone 2 analogue out: fixed, variable Whether the Copy/Zone 2 analogue output is controlled by the

volume control.

Zone 3 analogue out: fixed, variable Whether the Zone 3 analogue output is controlled by the

volume control.

Timeout to Home buttons: on, off Whether the soft keys revert to the home keys after a delay.

Diagnostic displays: on, off Whether diagnostic displays are shown.

Is the G68 IR Controller? Auto, Controller, Not Controller Whether the product is the infra-red controller for the system.

Main System Address 1-8 Advanced setting (normally 1).

Copy System Address 1-8 Advanced setting (normally 2).

Zone System Address 1-8 Advanced setting (normally 3).

Product Address 1-8 Advanced setting (normally 1).

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 71 72

No comments

Meridian G68 Installation Guide Page 39