Meridian M2008HF User Manual download pdf (Page 5)

Basic Operation

On-hook dialing

Users can dial a number, using any LINE key, while the handset is

still on-hook.

Making a call while the handset is on-hook

1. Press the LINE key.

Response:

The indicator next to the LINE key comes on. The caller receives

dial tone.

2. Dial the phone number.

Response:

The caller receives ringing or a busy signal.

3. Pick up the handset when the called party answers.

Note:

If equipped with the Handsfree option, it is not necessary to lift the

handset.

4. Press the Rls key to disconnect from a busy signal or no answer

or to terminate the call.

Response:

The active key indicator goes off if the called party does not answer

or if the number is busy.

5. You have completed this procedure.

Optional Handsfree (M2008HF and M2616)

The Handsfree feature on the M2008HF and M2616 set is software-assigned. It allows the user

to talk to another party without lifting the handset. To activate Handsfree, press the

Handsfree/mute key or select a LINE without lifting the handset. When the Handsfree feature is

activated, the liquid crystal display (LCD) remains lit. To deactivate the Handsfree feature, pick

up the handset, or end the call by pressing the Rls key. If the calling party disconnects before the

Handsfree user disconnects, the Handsfree feature remains enabled unless the user presses the

Rls key. When the telephone is ringing, pressing the Handsfree/mute key turns on the Handsfree

unit and allows the user to answer the incoming (ringing) call by pressing a LINE key without

picking up the handset.

1 2 3 4 5 6 7 8 9 10 ... 25 26

No comments

Meridian M2008HF User Manual Page 5