Setting up the Digital to Analogue Converter
20
To clean the connections
The audio and digital phono connectors on the back of the
Digital to Analogue Converter are gold-plated and need no
cleaning if gold-plated phono plugs are used. Otherwise, it is
recommended that you unplug and reconnect each plug at least
once a year. A proprietary contact cleaner can be used to some
advantage.
To change the mains fuse
Fuse
Spare
● Remove the mains connector, and pull out the drawer next to
the power input to access the fuses.
Before replacing a blown fuse, if possible ascertain the cause of
the failure.
The fuse drawer includes a spare fuse. This should be replaced
by a fuse of the same rating.
Cleaning
When cleaning the Digital to Analogue Converter bear in mind
that the front of the Digital to Analogue Converter is plastic, and
the display panel and lid are glass.
Disconnect the power cord before cleaning the unit.
Note: Do not use abrasive cleaners on any part of the Digital to
Analogue Converter.
To clean the case, display panel, and
keypad
● Use a slightly damp cloth.
Ensure that no water is allowed to get inside the case, and do
not reconnect the power until you are certain that the Digital to
Analogue Converter is completely dry.
Maintenance
Comments to this Manuals