Meridian RGB-T-0 Installation Guide download pdf (Page 8)

Introduction

Unlike other players that use a mechanical approach to try to

lower jitter by minimising drive vibration, the G Series DVD players

employ a triple buffering system to minimise jitter, maximizing HF

transparency and sound stage precision and stability. The result of

this sophisticated effort is that the players deliver ultra-low jitter,

with sound and picture quality second only to Meridian’s 800

Reference DVD/CD Player.

The digital electronics as a whole are driven by a new design of

high-stability clocking system which further reduces jitter and

ensures that the highest level of detail is recovered from a disc. All

digital data is accurately re-clocked. Multiple power supplies ensure

that digital and analogue circuitry are kept separate.

User interface

The G Series DVD players include a comprehensive front-panel

user interface which allows access to all the features of the unit.

The players can be reset to a standard Type which configures all

the required settings as appropriate for a particular application.

In addition, an on-screen display (OSD) allows you to configure

specific settings individually.

The players employ Flash ROM memory for the operating system,

so software updates can be downloaded from the Internet and

installed via a PC connected to the serial port on the back panel.

The serial port also allows full remote control and configuration of

the unit.

Audio

The G98DH and G91A provide three principal S/PDIF coax outputs

designated L/R, L/R Surround, and C/LFE. These typically connect

to Meridian processors, or feed a stereo signal to a pair of DSP

loudspeakers. If configured for MHR SmartLink they, or the adjacent

combined 15-way D-type connector, carry high-sample rate

encrypted data from DVD discs for the highest fidelity of decoding

and reproduction. The SmartLink also informs a downstream

Meridian processor of the signal source, so that it can switch

processing modes automatically.

The G98AH provides six channels of analogue output. These feature

true 24-bit DACs that operate at sample rates up to 192kHz for the

maximum possible audio quality. The audio connectors have gold-

plated contacts.

All models provide an additional S/PDIF digital output which

delivers a stereo downmix or bitstream signal.

Preamplifier and tuner (G91A only)

The G91A includes a preamplifier and integral AM/FM or DAB/FM

tuner. The main stereo analogue preamp output is either fixed,

or variable via the front-panel knob which controls the Meridian

proprietary digital/analogue volume control as used in the 800

Series and DSP 8000.

The AM/FM tuner provides FM (VHF stereo Band II) reception with

RDS and is fitted with its own 96kHz, 24-bit A/D stage. Digital

signal processing provides a sophisticated FM stereo blend/width

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 66 67

Comments to this Manuals

No comments

Meridian RGB-T-0 Installation Guide Page 8

Comments to this Manuals

Related products and manuals for DVD players Meridian RGB-T-0